Repair & maintenance guides

Engine Alignment on Sterndrives and Inboards: What to Check and When

A sterndrive engine must line up with its gimbal bearing and coupler, and an inboard engine with its prop shaft. When it drifts out of line you get vibration, noise and worn-out couplers, bearings and seals. Learn the warning signs, the checks you can do yourself and why the alignment itself is a job for a pro with special tools.

Engine and Gearbox Oil Analysis: How to Take a Clean Sample and Read the Report

A lab oil analysis is like a blood test for your engine, transmission or lower unit. Learn how to pull a clean sample, what the lab measures, what wear metals, coolant, sea water and fuel in the oil can mean, and why the trend over several samples matters more than any one number.

Engine Clicks but Won't Crank - Testing the Battery, Cables, Neutral Switch, Solenoid and Starter

A click (or nothing) when you turn the key is usually a power delivery problem, not a dead engine. Work from the battery and cables through the neutral switch, start relay and solenoid to the starter motor using simple voltage-drop tests, and learn how to jump-start safely when gasoline vapor may be around.

Engine Cut-Off Switch (Kill Switch) and Lanyard: The Law, Testing and Daily Use

How the engine cut-off switch (ECOS) and its lanyard or wireless fob work, when federal law requires you to wear it (boats under 26 feet, 3 hp or more, on plane), how to test it before every trip, and why a spare clip aboard matters.

Engine Hour Meters: Why Hours Matter, How to Verify Them and How to Replace a Meter Honestly

Engine hours set your service schedule and a big part of your boat's resale value. Learn the difference between analog meters and engine-computer hours, how to verify the real hours on a used boat, and how to replace a dead or broken meter while keeping an honest record of the old hours.

Engine Overheating - Troubleshooting Guide

Work through the most likely causes of a hot engine or overheat alarm, from a blocked water intake to a worn impeller or stuck thermostat. Acting fast and in the right order can save your engine and often gets you home without a tow.

Engine Room Automatic Fire Suppression: How It Works, Checks and What to Do After a Discharge

Understand the fixed clean-agent extinguisher in your engine room - how it fires, why the engines must shut down, how to check the helm status light, gauge and cylinder weight, when it needs service - and the safe sequence to follow if it ever goes off, starting with keeping the hatch closed.

Engine Room Ventilation: Combustion Air, Blowers and Keeping Salt Out

Inboard engines, diesels above all, breathe huge amounts of air, and a hot or starved engine room quietly costs power, fuel and turbo life. Learn how engine-room air works, how to inspect vents, ducts, fans and salt-spray filters, the warning signs of too little air, and the separate gasoline blower rule.

Engine Starts Then Dies - Troubleshooting Guide

Track down why your boat engine fires up and then stalls, whether at idle, when you shift into gear, or after a few minutes of running. Most causes are in the fuel supply and can be checked with no special tools.

Engine Warning Horn and Dash Lights: What They Usually Mean and What to Do

Learn what a warning horn, beeps or a dash light usually mean on a boat engine, from overheating and low oil pressure to water in the fuel and reduced-power (limp) mode. Find out what to do right away and when to stop the engine. Patterns differ by brand, so match what you hear and see to your owner's manual.

Engine Won't Start or Won't Crank - Troubleshooting Guide

Find out why your boat engine will not turn over or will not fire, starting with the simple things owners miss most, like the kill switch lanyard and battery switch. Many no-starts are fixed at the ramp in minutes without a tow.

EPIRB and PLB Care: Registration, Batteries, Self-Test and Mounting

Keep your 406 MHz emergency beacon ready to work on the worst day of your life. Register it free with NOAA and renew every two years, track the battery and hydrostatic release dates, run the self-test without triggering a false alert, and know what happens after you press the button.

Ethanol (E10) Fuel Care: Stabilizer, Phase Separation, Fuel Lines and Tank Vents

Keep E10 gasoline from damaging your boat engine. Learn how to use stabilizer, test for water and phase separation, and inspect the fuel lines, primer bulb, anti-siphon valve and tank vent. Most fuel-related breakdowns start with one of these.

Extended Warranties and Service Plans for Boat Engines: Factory Plans vs Third-Party Contracts

Decide whether an extended service plan is worth it: how factory plans such as Mercury Product Protection and Yamaha Y.E.S. differ from third-party contracts, what they usually cover and exclude, why maintenance records decide claims, how deductibles, transfers and cancellations work, and the questions to ask before you sign. Practical guidance, not legal or financial advice.

FCC Ship Station License vs. a Free MMSI: Which One Your Boat Needs, and How to Keep It Current

Most U.S. recreational boats that stay in U.S. waters don't need an FCC radio license, but every DSC radio and AIS needs a registered MMSI. Learn when an FCC ship station license and operator permit are required (foreign ports, SSB/HF, satellite), how to get an MMSI from BoatUS, America's Boating Club or Shine Micro, and what to do when you sell, buy or rename a boat.

Financing a Boat: Loan Terms, Survey and Insurance Requirements, Liens and the True Cost of Ownership

Understand a boat loan before you sign: typical terms and down payments, what lenders check, why they want a survey and insurance, how the lien is recorded (Coast Guard preferred mortgage for documented boats, state title for the rest), how the payoff works when you sell, and how to add up the real yearly cost beyond the monthly payment. Practical guidance, not financial advice.

Fish Box Drains and Macerator Pumps: Clogs, Check Valves and Odor Control

Keep insulated fish boxes draining and smelling clean by clearing scale and slime clogs, checking the macerator pump, check valve and fuse, rinsing after every trip and making sure the water goes overboard instead of into the bilge.

Fish Finder and Depth Sounder Transducers: Mounting, Fixing Bad Readings and Cleaning

Where and how to mount a transom-mount transducer so it reads cleanly at speed, how to track down lost bottom readings and noisy screens, how to clean and paint a transducer without ruining it, and why thru-hull transducers are a haul-out job for a pro.

Fish Finder Settings: How to Tune Your Sonar for a Clearer Picture

Get more out of your fish finder by setting frequency, gain (sensitivity), range, contrast, color palette and noise filters on purpose instead of leaving everything on auto, plus how to set the depth offset and track down interference from other electronics.

Fixing a Sagging Cabin Headliner: Re-glue, Battens or Replace

Find out why cabin headliners sag, when a quick re-glue is worth trying, how wood battens make a lasting fix, and how to replace fabric, vinyl or panel liners safely with good ventilation and without drilling through the deck.

Flybridge and Upper-Deck Safety: Weight Up High, Rails, Ladders and CO

People and gear on a flybridge, tower or pontoon upper deck raise the boat's center of gravity and cut its reserve stability. Learn how many to allow up top, how to check rails, gates, ladders and hardtop or tower loads, how to get crew down safely in rough water, and why carbon monoxide can collect at the stern and even on the bridge.

Four-Stroke Outboard Oil Level Rising or Smelling Like Gas: What It Means and What to Do

If the oil on your four-stroke outboard's dipstick keeps going up or smells like gasoline, fuel is probably getting into the crankcase. Learn how to check the level the right way, why lots of idling, trolling, short runs and cold water cause it, what you can do yourself, and when a fuel-system fault needs a dealer.

Freshwater Pump Troubleshooting: Cycling, Won't Shut Off or No Water

When the pressure water pump keeps cycling at night, runs nonstop or sputters air, the cause is usually simple: an empty tank, a dripping fixture, a clogged strainer, air in the lines or a tired accumulator. Work from the cheapest checks to the pressure switch and pump, and learn the basics of replacing a pump.

Fuel Anti-Siphon Valve: Diagnosing a Sticking Valve and Replacing It Safely

The anti-siphon valve at your built-in fuel tank stops gasoline from draining into the bilge if a fuel line breaks, but a cheap or sticky one can starve the engine at speed. Learn how to tell a restricted valve from a blocked vent or filter, how to clean or replace it with a quality valve of the right type, and why you should never pull the check ball out.