BoatMend

Repair & maintenance guides

Plain-English, step by step, written for owners. Pick your engine to see the guides that apply to it.

13 of 459 guides

Routine serviceEasy

Boat Fuel Additives Explained: What Stabilizers, Ethanol Treatments and Boosters Really Do

The marine store shelf is full of bottles that promise to fix fuel problems. Learn what stabilizers, ethanol treatments, water removers, octane and cetane boosters, cleaners and diesel biocides actually do, what no additive can do, how to dose them by the label and why you should not stack several products in one tank.

20 min All engines
Routine serviceEasy

Ethanol (E10) Fuel Care: Stabilizer, Phase Separation, Fuel Lines and Tank Vents

Keep E10 gasoline from damaging your boat engine. Learn how to use stabilizer, test for water and phase separation, and inspect the fuel lines, primer bulb, anti-siphon valve and tank vent. Most fuel-related breakdowns start with one of these.

1 h Outboard, Sterndrive (I/O), Gas inboard, Jet boat, Jet ski / PWC Shop: $100-300
Routine serviceEasy

Generator Pre-Trip Check: What to Inspect and Test Before a Cruise

A marine generator that quits on the first hot night of a cruise usually gave warning signs at the dock. Use this pre-departure checklist, based on generator makers' own advice, to inspect the oil, coolant, belt, raw-water side, exhaust and CO alarms, run the set under real load, and pack the right spares.

1 h 15 min Marine diesel, Gas inboard, All engines Shop: $150-500
Routine serviceEasy

Gyro Stabilizer Care: Owner Checks for Seakeeper and Other Boat Gyros

A gyro stabilizer needs little from you, but what it needs matters. Learn how to start and shut it down correctly, keep its seawater cooling and zinc in shape, rinse it, read its hours and alarms, winterize it, and know which jobs belong to a certified dealer.

45 min All engines Shop: $500-2500
Routine serviceEasy

How to Find Your Engine's Serial Number, Model and Year (and Get the Official Manual)

Find the ID label on your outboard, sterndrive, inboard diesel or PWC, read the model and serial number correctly, tell it apart from the boat's HIN, and use it to open the free official owner's manual. It's the first step for ordering the right parts and following the right maintenance plan.

20 min All engines
Routine serviceEasy

How to Keep a Boat Maintenance Log and Organize Your Receipts

Set up a simple maintenance log that records the date, engine hours, work done, parts and who did it, and keep receipts and photos organized. Good records help with warranty and insurance claims, show buyers the boat was cared for and reveal wear patterns before something fails.

1 h All engines
Routine serviceEasy

How to Maintain Your Mainsail Reefing System and Practice a Reef at the Dock

Check the reef lines, blocks, hooks and cringles of a slab (jiffy) reefing system, keep in-mast and in-boom furling mains running smoothly, and practice tucking in a reef at the dock so it is quick and safe when the wind comes up.

1 h 30 min All engines Shop: $150-600
Routine serviceEasy

How to Service Sailboat Winches (Clean, Oil the Pawls, Grease the Gears)

Take your sheet and halyard winches apart, clean out old grease and salt, oil the pawls, lightly grease the gears and bearings, and put them back together. A serviced winch turns easily and, more importantly, its pawls catch every time so the drum can't spin backward under load.

1 h All engines Shop: $75-150
Routine serviceModerate

Jet Boat Care - Flushing, Clearing the Pump, Oil, Steering Nozzle and Storage

A practical care routine for twin-engine sport jet boats like Yamaha models: pre-ride and post-ride checks, flushing both engines the safe way, clearing debris from the pumps, spotting a worn wear ring, keeping the nozzle and reverse bucket working, and getting the boat ready for storage.

2 h Jet boat Shop: $200-600
Routine serviceModerate

Jet Outboard Care: Grease, Intake Grate, Impeller Clearance and Shallow-River Habits

A jet outboard trades the propeller and gearcase for a pump, so it needs different care. Learn how mounting height works, why the pump bearing needs frequent grease, how gravel and a worn impeller steal thrust, how to clear the intake safely, and when an adjustment is a shop job.

45 min Outboard, Jet boat Shop: $150-900
Routine serviceEasy

Jet Ski and Jet Boat Pump Care: Clearing the Intake Grate and Checking the Impeller and Wear Ring

Clear weeds, rope and rocks from the intake grate of a Sea-Doo, Yamaha WaveRunner, Kawasaki Jet Ski or jet boat, and learn to spot a damaged impeller or worn wear ring. A clogged or worn pump is the usual reason a jet craft revs high but goes slow.

45 min Jet ski / PWC, Jet boat Shop: $150-600
Routine serviceEasy

Onboard Tool Kit and Spare Parts: What to Carry on a Day Boat or a Cruiser

Build a tool kit and spares box that fits your boat and how far you go. A blown fuse, a clogged fuel filter or a dinged prop shouldn't end the day or turn into an expensive tow.

1 h 30 min All engines
Routine serviceEasy

Portable Toilets on Boats: Emptying, Chemicals, Odor, Seals and Winter Storage

A portable toilet (Porta Potti type) is the simplest legal head for a small boat, as long as it is emptied the right way. Learn where to dump it, which chemicals to use, how to stop odor and leaks, how to secure it aboard, and how to store it for winter.

30 min All engines

Safety: BoatMend is for information only and does not replace a certified marine technician. You are responsible for your safety and your boat. Read the full disclaimer.